| |
 |
| Sensors |
| |
A wide range covers high performance Photo, Inductive,
Capacitive and Magnetic Sensors. |
| |
Specifications & Features |
Photo Sensors |
• Inductive Proximity Sensors |
• M 18 cylindrical photoelectric sensors |
• Size: 4 to 80 mm |
• Sensing distance 20cm - 5m |
• Sensing range: 0.8mm to 40mm |
• Retro reflective |
• Models with cable or connectors |
• Thru Beam Emitter-Receiver |
• Wide range of outputs |
• Models with cable or connector arrangement |
Special Models |
Magnetic Sensors |
• Short housing models |
• Hall effect Magnetic Sensors |
• Increased range models |
• Reed Contact Magnetic Sensors |
• Operating Temp. upto 125C |
• Namur Sensors |
Capacitive Proximity Sensors |
• Photo Sensors in Rectangular Housing |
• Size: 18 to 30mm |
• Optical Barrier |
• Sensing range: upto 25mm |
• Sensors for specialised applications |
• High stability temperature range |
|
• High immunity against interference |
|
|
|
|
| |
 |
| Plug in Relay |
| |
Universal and Minature Plug in Relays |
| |
Features |
Applications |
| • In Build Mechanical Indicator and test/Latch button |
• PLC to electromechanical interfaces |
| • LED Indication |
• Electrical Interlocking in control circuits |
| • 12/24/48/11O VDC Coil Voltages |
• Control of solenoids/valves from PLC |
| • 12/24/48/110/230 VAC Coil Voltages |
• Multiplication of contacts in control circuits |
| • CE Compliance |
• Change of voltage levels in control circuits |
| • 2 and 3 Changeover Universal Relays - 10 Amp |
|
| • 2 and 4 Changeover Miniature Relays - 5 Amp |
|
|
|
|
| |
 |
Electronic Timers |
| |
A wide range af Electranic Timers & Devices that are ideally suited for sequence control and various other applications. |
| |
Specifications & Features |
| • Multi function, Multi-range, Multi voltage |
| • Calibrated scale for easy time setting |
| • Compact dimension |
| • LED indication for power and relay status |
| • DIN rail mounting or base mounting |
|
|
|
| |
 |
Counters |
| |
Features |
| • Selectable Counter, Chronometeror Timer Function |
| • Up Counter, Down Counter, Up/Down Counter |
| • Up Chronometer, Down Chronometer |
| • Timer with On delay, Interval, Off delay, Single Shot, and Cyclic functions |
| • with programmable time base |
| • Selectable Decimal point |
|
|
|
| |
 |
Sinus N |
| |
0.4 - 3.0Kw, 200 - 230 Vac, Input - 1 phase, Output - 3 phase |
| |
Specifications & Features |
|
| • SENSORLESS VECTOR and V/F CONTROL |
• PID function |
| • Integrated Potentiometer and run/stop buttons |
• Skip frequencies |
| • Motor auto-tuning for optimum performance |
• RS 485 MOD BUS RTU COMM. (Optional) |
| • Anti-stalling and anti-trip algorithm |
• Approvals CE & UL |
| • Automatic and manual torque boost |
• Compatibility with REMOTE DRIVE |
| • Speed search |
|
|
|
|
| |
 |
Sinus M |
| |
0.37 -7.5Kw 380-480Vac, Input - 1/3 phase, Output - 3 phase |
| |
Specifications & Features |
|
• SENSORLESS VECTOR and V/F CONTROL |
• Speed search |
• Run/stop buttons |
• PID function |
• Integrated Braking Module |
• Skip frequencies |
• Motor auto-tuning for optimum performance |
• Inbuilt RS 485 MODBUS RTU COMM |
• Anti-stalling and anti-trip algorithm |
• Approvals CE & UL |
• Automatic and manual torque boost |
• Compatibility with REMOTE DRIVE SOFTWARE |
|
|
|
| |
 |
Sinus K/ Penta |
| |
4.7 Kw - 2000 Kw, 3 Phase supply 380 - 415 Vac |
| |
Specifications & Features |
|
| • IGBT Inverter |
• Lower motor noise |
| • Smart key pod |
• PID function |
| • Intelligent Cooling system |
• Integrated thermal protection of motor |
| • Integrated breaking module |
• Programmable digital analog inputs & outputs |
| • One product three function |
• Available in 660-690VAC also, for 400KW & above |
|
|
|
| |
|
Sinus K/ Penta |
| |
4.7 Kw - 2000 Kw, 3 Phase supply 380 - 415 Vac |
| |
Specifications & Features |
|
| • IGBT Inverter |
• Lower motor noise |
| • Smart key pod |
• PID function |
| • Intelligent Cooling system |
• Integrated thermal protection of motor |
| • Integrated breaking module |
• Programmable digital analog inputs & outputs |
| • One product three function |
• Available in 660-690VAC also, for 400KW & above |
|
|
|
| |
 |
DCREG Digital DC Drives |
| |
DCREG2 & DCREG4 DC Drives are designed for the power supply to the armature & field circuits of direct current motors. |
| |
Features |
|
• 2 and 4 Quadrant |
• Optional Remote Drive Software |
• 10A - 3500A (2A - 2205 Kw) |
• Full digital |
• Predictive control |
• Field boost |
• Integrated multimeter |
• Higher safety by automatic switching b/w feedbac |
• Adjustable Accel. and Dec. Time from 0-300 Sec |
• Auto Reset Alarms |
|
|
|
| |
 |
Soft Starters - ASAC Series |
| |
ASACO & ASAC 1 Series Soft Starters
Range7.5Kw-110Kw
Power supply voltage range 200 - 575 Vac |
| |
Specifications & Features |
| • Compact size. |
| • Internal By-Pass Cantactor |
| • 400 % max allowed overload of the nominal current |
| • IP20 Enclosure |
| • Adjustments - Start voltage, start ramptime, soft stop
ramptime, current limit, current ramp |
| • Remote drive software compatible |
|
|
|
| |
 |
Soft Starters - ASA Series |
| |
ASA Series Soft Starters
Range 12 A - 2361 A
Power Supply Voltage 200 - 690 Vac |
| |
Specifications & Features |
| • 4 types of motor starting & 3 type of motor stopping |
| • Allowed overload from 300 to 450% of the nominal current |
| • IP 42 & IP 54 Protection degree |
| • Thermal Motor Protections Also available for medium voltage range |
| • Remote control panel |
| • Remote drive software |
| • Operation with & without by-pass contactor |
| • 3 wire & 6 wire connection |
|
|
|
| |
 |
PLR SR Series |
| |
Specifications & Features |
|
| • Supply Voltage 12-24 VDC/ 100-240VAC |
• 6 Wireless remote control input points |
| • Output current 10A(Relay) & 2A(Transistor) |
• Voice alarm function |
| • Control maximum 82 I/Os including 8 analog inputs |
• HMI Detachable |
| • Timers, Counters & RTC Switches up to 128 Nos |
• Offline simulation on programming software SUPERCAD available |
|
|
|
| |
|
PLR FAB Series |
| |
Specifications & Features |
|
• Function Block and Ladder Programming |
• FAB SCADA |
• HMI Detachable |
• On Board 12 analog inputs |
• Program can be changed from ladder to FBD and vice versa |
• RS-485 communication port available |
• Remote programming & control through modem |
|
|
|
|
| |
 |
PLC |
| |
Specifications & Features |
|
| • Windows CE Based operating terminal |
• Device Communication via Ethernet, RS
232/422/485 |
| • 5.6" to 12.1" TFT Displays |
• Sufficient Internal memory for large size
applications |
| • 64k Color Displays |
|
| • External Data Interface-USB, SD/MMC |
|
|
|
|
|
|
| |
 |
X-Panel |
| |
Specifications & Features |
• Windows CE Based operating terminal |
• 5.6" to 12.1" TFT Displays |
• 64k Color Displays |
• External Data Interface-USB, SD/MMC |
• Device Communication via Ethernet, RS
232/422/485 |
• Sufficient Internal memory for large size
applications |
|
|
|
| |
 |
Touch Panel |
| |
Specifications & Features |
• Panel Mounted Operator Terminal with Built in SCADA software |
• 12.1" & 15" TFT Display |
• High Color/ Resolution TFT |
• Panel Mountable Structure |
• All in one Embedded Board |
• Connectivity with four Serial Ports and Ethernet Port
|
|
|
|
| |
 |
SCADA |
| |
Specifications & Features |
• Panel Mounted Operator Terminal with Built in SCADA software |
• 12.1" & 15" TFT Display |
• High Color/ Resolution TFT |
• Panel Mountable Structure |
• All in one Embedded Board |
• Connectivity with four Serial Ports and Ethernet Port
|
|
|
|
| |
|
|
|
